AVIRE AC-2CT18-100-0-2L-000, Руководство по установке, Страница: 14 / 23

14
7. External Pictogram (LED’s) Voltage Selection
This switch allows you to choose either 12V or 24V output for
the external pictogram LED’s (default 12V).
Connector Details
Label Connector Description
1 Antenna External antenna – Only use antennas authorised by Avire, otherwise the device might not
work.
2 SIM card Insert Avire or Non-Avire SIM card here
3 Battery Internal battery*
4 Prog. DCP Required for debugging (only for Avire Technical support)
5 DCP configuration See DCP configurations
6 Serial Connector RS-232 or 422/485 Serial Connector
7 SLIC Phone line
8 Power External power supply
9 Fuse Exchangeable fuse
10 LPBus Low Power Bus which connects to external audio units and other LPBus devices
11 DAU outputs
(siren) Type N outputs, open collector,
configurable by parameters. The maximum
switching voltage is 30VDC and the
maximum current for each output is 150mA.
12 6 Car alarm Cabin alarm button **
5 Vout Common output
4 Filter Alarm filter **
3 Top/Bot alarm External alarm push to generate call
2 Intercom Intercom call to machine room handset
1 Vout Common output
Pin Function Signal
1 L1 Tip
2 L2 Ring
Pin Function Signal
1 L Live
2 N Neutral