Avipas AV-1082G, Руководство пользователя

Страница: 12 / 43

12
IR Remote Control Menu
1. Standby Button
Press this button and hold it for 3 secs to enter standby mode. The
camera will do self-testing and return back to
【
HOME
】
position.
(Note: If Preset 0 is set, and with no operation for 12s, the camera will
automatically turn to Preset position 0.
2. Camera Address Selection
Press the camera address number to control the particular camera with
the address setting.
3. Number Keys
To set or call 0-9 presets.
4. *, #, Key Combination
To use as combination with
【
F1-F4
】
to set camera address.
【
*
】
+
【
#
】
+
【
F1
】
: Camera Address No.1
【
*
】
+
【
#
】
+
【
F2
】
: Camera Address No. 2
【
*
】
+
【
#
】
+
【
F3
】
: Camera Address No. 3
【
*
】
+
【
#
】
+
【
F4
】
: Camera Address No. 4
5. Focus Control
【
AUTO
】
: to enter auto focus mode.
【
MANUAL
】
: to enter manual focus mode.
Switch the camera focus mode to manual by pressing FOCUS
【
+
】
or
FOCUS
【
-
】
to adjust.
6. Zoom Control
ZOOM
【
+
】
: Lens near; ZOOM
【
-
】
: Lens far
7. Set/ Clear Presets
【
SET PRESET
】
+
【
0-9
】
number key: To set presets
【
CLEAR PRESET
】
+
【
0-9
】
number key: To clear presets
8. Pan-Tilt Control Buttons
Press the Up, down, left and right buttons to adjust the camera position. Press
【
HOME
】
to return to the center position.
9. BLC Control
【
BLC ON/OFF
】
: To turn on/off the back light.