- 27 -
The section allow you to auto wake up the assigned PC ( with setting MAC ) in LAN by the times
of " Ping Failures " .
To enable the " wake up setting" , you need to assign the MAC address of controlled device in "
PC Control Settings " of " Power Control Settings" as following :
First : Click " PC Control settings " of "Power Control settings " and set the MAC address plan
to ping and click "Save" bottom.
Second : Go to "Wake up Settings " under " Ping Settings "" of " Power Control settings " and
setup : enable , IP address and the times of ping failures.
As above picture , the pink value 0 next to the Ping Failures value 6 means the exact pig
failure times is zero time . As the pink value reach to the setting value , device will action as
setting .
Connectivity Alarm :
The section allow you to enable or disable the alarm as lost network connectivity.
As enable this function , 9258HP will keep beeping if it`s own network connectivity lost.
