- 16-
Ref#9223K05260001
PIN I/O
The Pin I/O column is the labels for the ports on the device.
By default the output ports are labeled as Out1, Out2, Out3, & Out 4. To rename these default labels please
see section “
Definite I/O Name
” for direction.
Note:
Please remember that you use normally open or normally closed the output control will either create a open
circuit or a closed circuit.
Device Status
Control Status
Circuit
Normally Closed
On
Open
Normally Open
On
Closed
Control
The control section allows the user to directly turn on or turn off the device. Select the control that you would
like to execute and hit apply to apply the settings. This will turn the device on or off.
Time
The timer allows the user to set an amount of time before a control is activated. To do this, simply enter the
amount of delay time in seconds you would like the action to occur. Select the On or Off and hit the apply
button. When the timer has reached the time set it will execute your command.
For example if Port 1 is on and I would like to turn it off in 30 sections, the command may look something
like the following.
Note: The maximum number of seconds that can be set on the timer of the device is 9999.
Define I/O Name
Define I/O is the section that allows the user to define the device name, country, and city. As well as the
names of each of the power outputs.
