Avios Zazzy, Инструкция по эксплуатации

Страница: 7 / 20

4. Insert vertical fin into horizontal stabilizer. Then carefully fit it to the fuselage. It is designed to
key together and align automactically. Secure tail to fuselage with two coarse thread screws.
Sizes listed in diagram below.
5. Install tail wheel unit. First attach plastic tail wheel arm to the rudder with two 2x13mm screws.
Next attach metal bracket to fuselage with two 3x17mm machine screws. Last, using a
3x10mm coarse thread screw to attach the rudder to the tail wheel bracket. This forms the
lower rudder hinge and should not be left off. Do not over tighten to prevent binding the rudder.
4
3x62mm 1pcs
3x47mm 1pcs
A.
2x13mm 2pcs
3x10mm 1pcs
3x17mm 2pcs
4