Avio IP-02UE, Руководство пользователя, Страница: 3 / 54

E-3
WARNING
• Concerning the use of this projector:
• It is anticipated that this projector will be used by adults. Especially when children younger than junior high school stu-
dents will be using this projector, we ask that an adult always attend the use of the projector for safety.
• If a fault occurs:
• If you detect smoke, or a strange smell or sound, immediately disconnect the power cable.
It is dangerous to continue using the projector after a fault occurs. Return the projector to the dealer where it was pur-
chased for repair.
• Avoid placing the projector near dangerous substances.
• Make sure that no metallic or flammable material can get into the projector through the air vents.
• Do not place any objects containing water on top of or next to the projector.
• If foreign matter gets inside the projector:
• If foreign matter such as water or metal gets inside, immediately disconnect the power cable.
It is dangerous to continue using the projector when foreign matter gets inside. Return the projector to the dealer where it
was purchased for servicing.
• Do not remove the cabinet.
• Do not remove the cabinet. There are high-voltage components inside and touching these parts could cause electric
shock, or damage the equipment.
• Handle the power cable safely.
• Do not place any heavy objects on top of the power cable.
Damage to the power cable can cause wire breakage, fire, or electric shock.
• Do not pull the power cable when disconnecting the power plug.
Pulling the cable may break the wires or cause fire or electric shock. Always hold the plug itself when pulling it out of the
power outlet.
If the power cord is damaged, purchase a new one from a distributor.
• Do not use damaged power cords (cords with exposed core wires, broken wires, etc.). Using damaged power cords could
result in fire or electric shock. Purchase a new power cord from a distributor.
• Do not peep into the lens.
• Do not peer into the lens when projecting images. The strong light could lead to vision impairment, etc.
• Do not touch the air vents or lamp cover
• While the lamp is lit and directly after it is turned off, the ventilation slots and surrounding area are hot. To avoid burns and
injury from the heat, keep your hands, face, etc., away from ventilation slots and surrounding area at these times.
• The area around the projector’s exhaust outlet gets very hot. Do not place the projector on tables, desk mats, etc., that
are vulnerable to heat. The table may be discolored, the desk mat warped, etc.
• Do not block the lens front
• Do not block the lens front during operation.
The powerful rays passing through the lens may cause fire or burns if you put anything in front of the lens or block the
lens with your hand during operation.
• Do not use any voltages other than specified.
• Do not use any voltages other than specified. Doing so could cause fire or electric shock.
• Do not beat the glass surface
• Do not beat the glass surface over the scanner. Doing so may break the glass, resulting in injury.
• Do not get on the unit. Do not put a heavy matter on it.
• To avoid damage and malfunction, do not place your weight on the projector or place heavy objects (2 kg or more) on top.
Also, do not places objects on the projector in such a way that part of the weight is concentrated on the glass surface.
The glass surface could break, resulting in injury.
• Do not bring your face close to the ventilation slots
• Do not bring your face close to the ventilation slots because should the lamp explode, particles and mercury contained in
the gas could enter your eyes or mouth. This could cause injury.
(If foreign matter has entered an eye, please receive a medical examination at a nearby hospital.)
• Do not put the projector in unstable places.
• Do not put the projector in unstable places such as on unstable desks or slopes.
Doing so could cause the projector to drop or turn over, resulting in injury.
Safety Precautions