
E-10
A Check of the Supplied Items and the Names of the Parts
Names and Functions of the Parts (Projector)
Remote control IR
sensor
Lens cap
Zoom lever
Turn this to adjust the screen size. See
Page E-24.
Projection lens
The image is projected
from here.
* Be sure to remove the
lens cap before pro-
jecting.
Focus adjustment ring
Turn this to adjust the focus.
See Page E-24.
Document cover
The document or printed material to be read is
placed under this cover.
See Page E-33.
Operation panel
The buttons used for regular
operation are located here. See
Page E-13.
Tilt foot
This foot is used to adjust the vertical angle of the
projection as well as the left-right balance. Turn-
ing it to the left extends it and turning it to the right
shortens it. See Page E-24.
Exhaust vents
Air is discharged from here.
Lamp unit cover
(Underneath projector)
The projection lamp unit is located inside.
See Page E-46.
Air intake
Air is drawn in from the side.
Input connector panel
Included are connectors for per-
sonal computer, video, and USB
memory*, etc.
See Page E-12.
Tilt adjustment lever
Press here to adjust the tilt foot. See Page E-24.
CAUTION
• During unit operation, do not obstruct the front of the lens. During operation, strong light through the
lens is projected. Obstruct the front of the lens causes fire or burn.
• During projection, be sure to remove the lens cap. Negligence to observe it may deform the lens cap.
• When a lamp explodes, it is possible that particles of glass and other material may be released out-
side from the ventilation slots; therefore, do not bring your face close to the ventilation slots, or the air
intake.
Содержание IP-02UE
Страница 1: ...A Proposal for New Presentations Intelligent Projector User s Manual iP 02UE...
Страница 53: ...E 53...