1. Log in to the camera web interface.
2. Display the
Setup > Network
page.
3. In the Time Settings area, select the camera time zone.
4. Click
Apply
.
5. At the bottom of the Time Settings area, click the
Configure NTP Server
link.
If you cannot see the link, select
Network
from the left menu pane.
6. In the NTP Server area, make sure the check box is selected then choose one of the following options:
l
DHCP:
select this option to automatically use an NTP server on the network.
l
Manual:
select this option to manually enter a specific NTP server address in the
NTP Server
field.
7. Click
Apply
.
Installing the Dome Cover
NOTE:
Be careful not to touch or scratch the dome bubble. Any marks or fingerprints on the dome bubble will
cause unwanted reflections in the -IR model.
1. Attach the lanyard to the dome cover.
2. Remove the plastic cover on the inside of the dome bubble.
3. Attach the dome cover to the base by tightening the screws with the Torx driver.
4. Remove the plastic cover on the dome bubble.
22
Installing the Dome Cover
