Avigilon H4A-DP1 Скачать руководство пользователя страница 17

Страница: 17 / 40

Mounting the Dome Camera

Connecting Cables

Assigning an IP Address

(Optional) Using the USB Wifi Adapter

Accessing the Live Video Stream

Aiming the Dome Camera

(Optional) Configuring SD Card Storage

Setting the Time

Installing the Dome Cover

Zooming and Focusing the Dome Camera

Configuring the Camera

Removing the Dome Cover

Remove the dome cover by loosening the screws that fix the cover to the base. Use a T20 Pin-In Torx driver to
loosen the screws.

NOTE:

Be careful not to scratch or touch the dome bubble. The resulting marks or fingerprints may affect the

overall image quality. Keep the protective covers on the bubble until after the installation is complete.

Mounting and Aiming Video Analytics Cameras

When installing an Avigilon video analytics camera, follow the listed mounting and aiming recommendations to
maximize the camera's analytics capabilities:

The camera should be installed above 274 cm (9').

The camera should tilt downwards no more than 45 degrees.

The camera image should be level with the horizon line.

The camera should be mounted to a stable surface to minimize the physical movement of the camera
after installation.

For more details, see

Designing a Site for Video Analytics

. The document is available in the eDocs app and on

the Avigilon website.

Inserting Cables through the Sealing Grommet

Unless specified otherwise, you must pull the required cables through the sealing grommet included with the
camera when using a cable entry hole.

Removing the Dome Cover

Содержание H4A-DP1









































Результаты поиска

Содержание H4A-DP1

Отзывы:

Похожие инструкции для H4A-DP1

Бренды по названию

Популярные бренды

Avigilon H4A-DP1, Руководство по установке

Результаты поиска

Содержание H4A-DP1

Отзывы:

Похожие инструкции для H4A-DP1

Бренды по названию

Популярные бренды