Protocol
Select one of the following
options to create an ACL based
on a specific protocol:
l
Any (IP) — Accept all IP
protocols packets
l
TCP — Accept
Transmission Control
Protocols packets
l
UDP — Accept User
Datagram Protocols
packets
l
ICMP — Accept ICMP
Protocols packets IGMP —
Accept IGMP Protocols
packets
Source Port for TCP/UDP
Select a port from the drop-down
list
Destination Port for TCP/UDP
Select a port from the drop-down
list
Source IP Address
Select Any if all source addresses
are acceptable or User defined to
enter a source address or range
of source addresses
Source IP Value
Enter the IP address to which the
source IP address is to be
matched
Source IP Wildcard Mask
Enter the mask to define a range
of IP addresses. Note that this
mask is different from other uses,
such as subnet mask. Here,
setting a bit as 1 indicates don't
care and 0 indicates to mask that
value
Destination IP Address
Enter the IP address to which the
source IP address is to be
matched
ACL Configuration Wizard
10