7. Enter the fields in the User Account tab:
l
Username — Enter a new user name between 0 and 20 characters. UTF-8 characters are not
permitted.
l
Password — Enter a password (UTF-8 characters are not permitted).
l
Confirm Password — Enter the password again.
l
Password Strength — Displays the strength of password.
l
Keep current username and password — Select to keep current username and password.
8. Click
Next
.
9. Enter the fields in the Time Settings tab:
l
Clock Source — Select one of the following:
n
Manual Settings—Select to enter the device system time. If this is selected, enter the
Date and Time.
n
Default SNTP Servers—Select to use the default SNTP servers.
Note:
The default SNTP servers are defined by name, thus DNS must be
configured and operational. Manual SNTP Server—Select and enter the IP
address of an SNTP server.
10. Click
Next
to view a summary of the configuration that you entered.
11. Click
Apply
to save the configuration data.
VLAN Configuration Wizard
VLANs are used to segment network traffic and isolate broadcast domains. Segmentation of a network helps
to increase security, reliability, and efficiency of a network. In the context of the Avigilon Control Center end
to end solution,VLANs are recommended to be used to isolate ACC Server incoming traffic (recordings) from
ACC Server outgoing traffic (playback). Cameras should reside on the recordings VLANs not accessible by
the remote monitoring workstation that should only access the ACC server through the monitoring VLAN.
VLANs consist in ports that are configured as Trunk and ports that are configured as Access:
l
Trunk Ports - carry the traffic of more than one VLAN and are used to exchange traffic between more
than one managed PoE switches having more than one VLAN configured.
l
Access Ports - assigned to a single VLAN. The frames that arrive on an access port are assumed to be
part of the access VLAN. This port type is configured on switch ports that are connected to devices
such as cameras or the recorder.
Note:
Note: By default, all switch ports are assigned VLAN 1 and VLAN 1 cannot be modified or
deleted prior to having other VLANs configured on the managed PoE switch.
VLAN Configuration Wizard
7