Regulatory
Prior to installation, it is necessary to find a suitable site indoors (this product should always be installed indoors).
It is assumed that the installer has required certifications and required permits. The Installer must follow electrical
standards and AHJ requirements.
All National and local Electrical codes apply.
l
This equipment is intended to be powered from a limited power source output of a previously certified
power supply.
l
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Class A Digital Devices
FCC Compliance Statement:
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Canada Class A
CE Mark – Europe (EU)
C-Tick – Australia and New Zealand
VCCI – Japan
NCC — Taiwan
SRRC— China
IDA — Singapore
KCC — Korea
UL Recognized Component (UL294 and UL1076)
RoHS compliant
3
