Avigilon 11MP-HD-PRO-C, Инструкции по эксплуатации и монтажу

Страница: 17 / 24

17
Cleaning
Image Sensor
The image sensor is protected from contamination by protective glass. Dust and other debris
can contaminate this protective glass.
To clean the protective glass, perform the following steps:
Remove the lens or dust cap.
Using a photographic-grade bulb-type blower (commercially available), blow away any
dust or foreign debris from the protective glass inside the lens mount.
Immediately replace the lens or dust cap.
If the protective glass is still not clean after completing the above steps, obtain an image sen-
sor cleaning swab and solution. To clean the protective glass, follow the instructions provided
by the manufacturer of the swab and solution. Avigilon recommends using a Type 2 Sensor
Swab™ and Eclipse® cleaning solution made by Photographic Solutions, Inc. For a world-
wide list of dealers visit the Photographic Solutions, Inc. website at www.photosol.com.
Caution
Never touch the image sensor or any glass elements inside the lens mount ex-
cept with the recommended cleaning apparatus.
Do not allow dust, moisture or any other foreign debris to enter the lens mount.
Avoid leaving the image sensor exposed for extended periods of time.
Always cover the image sensor with either a lens or a dust cap.
•
•
•
•
Body
Use a dry or lightly dampened cloth to clean the camera body.
Caution
– Do not use strong or abrasive detergents when cleaning the camera
body.
1.
2.
3.