EN
8
To complete your registration, set a password
between 6 and 20 characters long with letters and
numbers only. then press Terminé (Finished).
1.2 - CONNECTING THE WINDOW SENSOR
As soon as it is powered on, the device enters
pairing mode by default. The indicator light will
then flash until the pairing procedure is completed.
If it does not, follow the reset procedure on your
phone.
To start pairing, press
AJOUTER (ADD)
. Make
sure your phone is connected to your router’s 2.4
GHz WiFi network. If you already have a device
installed on the application (e.g. IP camera, smart
plug, etc.) click on + in the top right corner of the
application.
Choose the product that you wish to pair: select
HomeSensor Window.
Make sure the Window sensor is on and that its
red indicator is flashing. If not, press and hold the
reset button for 5s to make the red indicator start
flashing.
Select your 2.4GHz WIFI network (important: your
smartphone must be connected to the same WIFI
network that the sensor will use), enter your WIFI
password and press Suivant (Next).
IMPORTANT:
if a location authorisation request
message appears, you need to accept it for your
Android or iOS device to receive your WiFi.
IMPORTANT:
This device is compatible with 2.4
GHz - WPA/WPA2 networks. Not compatible
with 5 GHz WiFi or with WEP encryption. Please
check the WiFi settings of your router or contact
your Internet service provider if you experience
F - OPERATION WITH THE APP
