AvidHiFi Naim Slide Скачать руководство пользователя страница 4

Страница: 4 / 6

SET UP INSTRUCTIONS

Layout the contents and check you have all listed parts.

(Additional height cue housing is not shown)

Remove the cable clamp from the Naim arm cable.

This is not required and only impedes the suspension.

Attach the arm cable to the underside of the Naim Slide assembly,

using the 4 x M2 bolts supplied.

DO NOT USE THE SELF-TAPPING SCREWS SUPPLIED WITH THE ARM.

Before fitting check the natural orientation of the plug from the arm

wand and fit the arm cable socket accordingly.

Holding the assembly, making sure the sliding bars do not fall out,

remove the lower nut and remove the plastic transit fixing.

Note that the fixing holes on each sliding bar are of centre.

These fixing holes should be closest to the inside edge.

Making sure the sliding bars are in place, replace the plastics transit

bolt with the Naim mounting collar.

Note the position of the bias-fixing bolt.

Now fit the retaining nut but do not over tighten.
It may be necessary to rotate the mounting collar later.

DO NOT USE THE NAIM NUT SUPPLIED

Remove the bias hanger-retaining bolt.

Fit the bias hanger carefully with the same bolt, facing forward,

ly into the fitted collar.

the pillar

initially parallel to the siding bar and the base of the bias hanger

parallel the to sliding carriage.
Insert the pillar/bearing assemb

Use the locking screw on the side of the arm collar to grip
very lightly. The Allen key provided should be used with caution so as

to apply minimum force or the pillar will be damaged.

Содержание Naim Slide






