![background image](http://html.mh-extra.com/html/avid-technology/venue-sc48/venue-sc48_manual_3031300166.webp)
VENUE SC48 Guide
154
Adjusting Plug-Ins
Plug-Ins can be adjusted from the console or on-screen.
On the Console
VENUE SC48 lets you control plug-ins in the Channel Control
section of the ACS (EQ and Dynamics only) and in the Output
encoder section.
EQ Plug-Ins
EQ plug-ins can be selected and adjusted in the Channel Con-
trol section of the ACS. See “Adjusting EQ Plug-Ins” on
page 139.
Dynamics Plug-Ins
Dynamics plug-ins can be selected and adjusted with the ded-
icated controls in the Dynamics section in the ACS. See “Ad-
justing Dynamics Plug-Ins” on page 129.
Output Encoders
The Output encoders can be placed into Insert mode to adjust
any selected plug-in. Plug-in parameters map to the eight en-
coders and their switches; additional parameters are accessed
with the Previous Page and Next Page switches.
To adjust a plug-in from the console:
1
Do either of the following:
• If the desired plug-in is being used as a channel insert, se-
lect the channel or bus on which the plug-in is inserted.
• If the desired plug-in is being used as a bus processing
plug-in, bank to and select the FX Return or other chan-
nel assigned as the plug-in output.
2
Press the Insert Mode switch, located near the Output en-
coders. The first page of plug-in parameters is mapped to the
eight Output encoders.
3
To reset a parameter to its default value, hold Default/Alt
while rotating or pushing an encoder.
4
To adjust with greater resolution, hold Ctrl/Fine while rotat-
ing an encoder.
5
Press Prev Page or Next Page to bank to other plug-in param-
eters.
To move to the next plug-in on that channel or bus:
Press the Next Plug-In switch.
Display of Plug-Ins in Insert Mode
While in Insert Mode, the Output LCD displays the value and
name of the 8 currently banked plug-in parameters in the up-
per and lower row, respectively, for each parameter.
In this default Insert Mode view, adjusting an Output fader
temporarily shows fader level in the lower row of the Output
LCD for that channel, replacing the parameter name display.
Alternate Insert Mode View
You can use an alternate view to have Insert Mode display pa-
rameter values in the upper row and the associated bus name
in the lower row.
To view values and bus names for the Output encoders in Insert
Mode:
Press Default/Alt+Insert Mode.
Using the Source Switch
The Source switch toggles Input displays to show the names of
bus-fed plug-ins routed to a channel. Use the Source switch to
quickly identify which FX Returns or other channels are being
used as plug-in returns.
To view encoder values and bus names for Input or FX Return
channels:
Press the Source switch, located in the Display section to the
left of the input Mute/Solo/Select switches.
Encoders, Insert mode and Next Plug-In switches in the Output section
Output Encoders
Insert Mode
Next Plug-In
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk