E6L RAM Reseating and Cable Rework
2
5
Simultaneously pull the two bottom thumbscrews outward so their latches are fully extended, as shown in Figure 2.
6
Using the handle, slowly slide the core partially out, locate the interior catch on the right side of the tray, and press it to release the
core from the chassis.
7
Slowly slide the core out of the E6L chassis completely, and place it on your work surface.
Figure 2. Latches fully extended
Figure 3. Location of the interior catch
The core will not slide out of the E6L chassis until the latches are fully extended and the catch has been released. If you experience any
resistance, make sure the latches are fully extended before pulling.
