E6L RAM Reseating and Cable Rework
7
4
Remove the 3 screws that secure the outer RAM retention block and remove the block.
5
Carefully remove the large heatsink by loosening its four captive screws.
• Loosen the two exposed screws along the bottom of the heatsink, then insert your long screwdriver through the two access holes
at the top of the heatsink to loosen the two remaining screws.
6
Carefully remove the heatsink and set it aside (avoid touching any thermal grease on the bottom).
Figure 12. Removing the outer RAM retention block (original series retention block shown)
Figure 13. Loosening the exposed captive screws (shown at left) and the recessed screws (shown at right)
Figure 14. Lifting the large heatsink out of the core
