Avid Technology VENUE D-Show Sidecar, Руководство пользователя

Страница: 13 / 17

Chapter 2: Connecting and Configuring a VENUE D-Show Sidecar 9
11
Carefully align the top and front edges of the two units
while slowly tightening each of the five internal screws.
12
After the units have been attached, replace the top panels
on each unit using the same screws you removed earlier, re-
connecting their cables before fastening them to the chassis.
13
Turn the unit over and carefully place it face down on a
protected flat surface, so that only the meter bridge and front
edge of the units contact the floor.
14
Attach the provided brackets to the front and back rail slots
on the bottom of the unit, using four small flat head Philips
screws on the raised section and eight pan head Philips screws
with lock washers on each side.
Attaching the units with the internal screws
Attaching brackets to the bottom of the units