Avid Technology SC264, Руководство пользователя

Страница: 8 / 16

SC264 Guide 4
Back Panel
1. VGA Connector (DA-15)
Main video monitor connection.
2. Keyboard (PS/2)
Main keyboard connection.
3. Mouse (PS/2)
Main trackball connection.
4. Serial Port 1 (DE-9)
• Com1: not used.
• Com2: wired internally to the SNMP board's Com port.
5. Serial Port 2 (DE-9, top) and Serial Port 3 (DE-9, bottom)
Com3 and Com4: not used.
6. TT002 (75-ohm BNC, DE-9 female, DE-9 male)
• BNC port is for Bi/Tri-Level Video input.
• DE-9 female is for RS422 (Sony 9-pin).
• DE-9 male is for MIDI Machine Control and Timecode
I/O (via breakout cable).
7. GPIO Port 1 (DC-37)
GP Inputs and Outputs 1 to 16
8. GPIO Port 2 (DC-37)
GP Inputs and Outputs 17 to 32.
9. LAN Port 1 (Onboard RJ45)
Connect to EuCon Network Switch via RJ45 (provided).
10. LAN Port 2 (Auxiliary RJ45)
Optional connection for external network.
11 SNMP LAN Port (RJ45)
Connect this port to a network with SNMP monitoring or
e-mail services to enable the hardware monitoring system to
report errors.
12. USB Ports
Connect the USB MIDI Interface to one of these ports. Con-
nect a USB memory device to one of these ports for file
backup, application installations or updates.
13. Power Connectors (IEC)
Accepts two standard IEC power
cords (provided). Two auto ranging switching supplies accept
voltages between 100-240 VAC, 50-60 Hz.
14. TCC Main Port (DC-62)
Connect a TCC breakout cable (provided) to this port. This ca-
ble breaks out to four DA-15 connectors that provide control
hookup for the MC524 Monitor Interface and three ML530
Mic/Line Interfaces.
15. TCC Extension Port (DC-62, optional)
Connect a second TCC breakout cable to this port to connect
up to four additional ML530 Mic/Line Interfaces.
16. SNMP Serial Port (DE-9)
This port is used to configure the SNMP card from another
computer.
SC264 Back Panel