Avid Technology Pro Tools S6 Master Post Module Скачать руководство пользователя страница 23

Страница: 23 / 34

Chapter 4: Detaching Chassis

Detaching Chassis

To detach chassis from each other, you must remove seven fasteners.

To detach chassis:

Remove the Hex fasteners that secure the Front and Back Tie Plates to the adjacent chassis Side Wall (see Figure 15).

Remove the three #1 Phillips screws that secure the Chassis Bottom plate to the Side Wall of the adjacent chassis.

If your system includes Legs, remove the Hex fasteners and washers that secure Chassis Bottom Plates to the Beams.

Separate the detached chassis by carefully lifting the chassis or section to the left (when standing in front of the frame) up and
away from the chassis or section to the right.

Repeat for any other chassis that need to be detached.

Figure 15. Removing the fasteners that secure the Side Wall of one chassis to the Back and Front Tie Plates of another

On some early systems, the Ethernet Switch Tie-down Bracket might need to be removed to access one of the Phillips fasteners

Figure 16. Removing the Phillips fasteners that secure the Side Wall to the Chassis Bottom Plate)

Figure 17. Separating two detached chassis (front view)

(Not to scale)

M5x8 FHCS (7760-30553-00)

Fastener

M3 Hex

Tool

(Not to scale)

M3x6 SEMS (7760-30025-01)

Fastener

#1 Phillips

Tool

Содержание Pro Tools S6 Master Post Module



































Результаты поиска

Содержание Pro Tools S6 Master Post Module

Отзывы:

Похожие инструкции для Pro Tools S6 Master Post Module

Бренды по названию

Популярные бренды

Avid Technology Pro Tools S6 Master Post Module, Сборка/разборка

Результаты поиска

Содержание Pro Tools S6 Master Post Module

Отзывы:

Похожие инструкции для Pro Tools S6 Master Post Module

Бренды по названию

Популярные бренды