Avid Technology Nitris, Инструкция по использованию

Страница: 10 / 58

10
2. From the inside of the enclosure rail, slide the rack-nut clip over each hole you want to
use. Each front support rail needs 2 rack-nut clips for the front of the Avid Nitris.
Attaching Rack-Nut Clips onto the Rack Enclosure
Securing the Avid Nitris in a Rack
The Avid Nitris is secured in the front mounting rails of the rack with four rackmount
screws. If your rack has threaded holes, use the proper rack screws for your rack. If your
rack does not have threaded holes, attach the rack-nut clips included with the Avid Nitris as
previously described (see
“Positioning the Avid Nitris in the Rack” on page 8 ).
c
You should have someone helping you to lift the Avid Nitris enclosure.
Rack-nut clip slid
over hole
Rack enclosure
mounting rail