Avid Technology DigiDesign PRE, Руководство пользователя

Страница: 26 / 88

Pro Tools | PRE Guide
20
4
From the
Send To
pop-up menu, choose the
destination port for the connected PRE and
MIDI channel to transmit data. Again, be sure
you choose the correct MIDI channel in multi-
ple PRE configurations.
5
Click
OK
.
6
Open or create a Pro Tools session.
7
Choose
Setup > MIDI > Input Devices
and make
sure PRE is enabled as an Input Device.
Declaring Multiple PREs
You can configure additional PREs (up to a total of
nine) by repeating the above steps. Make sure that
none of the PREs are assigned to the same MIDI
channel (if daisy-chained) or port (if connected to
separate ports on your MIDI interface) in the
Pro Tools Peripherals dialog (unless you want
them to operate in ganged fashion).
Additional Options in the Peripherals Dialog
The following options can be set while you are de-
claring PRE in Pro Tools, but are also useful
during sessions to lock out front panel controls or
to globally change PRE settings.
Reset
Click Reset to return PRE parameters to
their defaults. Resetting takes place immediately;
you do not need to click OK to reset parameters.
Retain Current Settings
Select this option to re-
tain PRE channel settings when an existing session
with different settings is loaded. New sessions will
automatically retain the current settings.
The front panel settings that Pro Tools can re-
motely control are stored with the session, whereas
the number of PREs declared, their lockout and re-
tain current settings status, as well as their on-
line/offline status and output assignments are
stored as global (system) preferences.
Remote Lock-Out Mode Sets PRE to ignore front
panel controls. Remote Lock-Out mode can be dis-
abled by deselecting this option in the Pro Tools
Peripherals dialog, or by power-cycling the PRE.
Mapping PRE Outputs to Audio
Interface Inputs in Pro Tools
Individual PRE outputs must be manually mapped
to audio interface inputs before their audio and re-
mote controls will be available within Pro Tools.
After mapping PRE channels to Pro Tools analog
input paths, whenever you associate a track with an
input path (created in I/O Setup) which is also a
physical input that the PRE channel was mapped
For more information on enabling input
devices, see the Pro Tools Reference Guide.
Press and hold Alt (Windows) or Option
(Mac) while making changes to simultane-
ously apply changes to the selected Mic Pre-
amp and all Mic Preamps below it.
When changing Mic Preamp sources and des-
tinations with the Alt/Option key, updates are
applied sequentially (for example, changing
the Receive From destination in the second
row to PRE #2-2, will update the destination
in the third row to PRE #3-2, and so on).
When Retain Current settings is not selected,
PRE settings will be overridden whenever
you open a session that has PRE settings,
even if no tracks exist in the
session.
To ensure you retain your current settings,
check the Retain Current Settings box,
before you open a session.