Avid Technology Avid Adrenaline, Руководство пользователя

Страница: 40 / 54

Using the Avid Adrenaline
40
Connecting the Yamaha 01V/96 Mixer
You can connect a Yamaha 01V/96 mixer via MIDI using the same procedure
described in
“Connecting the Yamaha 01V Mixer” on page 38 . However, Avid
recommends that you use a USB connection for this mixer. For information on
configuring on connecting the Yamaha 01V/96, see “Setting Up the Yamaha
01V/96 or Yamaha 01V” in the Help.
Controlling a Video Deck
Avid editing systems provide video deck control through a serial control
connector on most decks. You can control a single deck by using an RS-232 to
RS-422 serial adapter. An optional RS-232 to RS-422 serial adapter kit is
available through Avid.
The optional serial adapter kit that contains the following:
• An RS-232 to RS-422 serial adapter
• Two serial cables with 9-pin male connectors at both ends
To connect a single deck to your system:
1. Locate the serial adapter kit.
2. Attach one end of a 9-pin cable to the end of the serial adapter labeled
RS-232.
3. Attach the other end of the 9-pin cable to the serial port on the Avid
editing system (see the following figure) or to the serial connector of the
USB-to-serial adapter.
n
When you attach the cable to the serial port on the PC, note if you are using
the COM1 or COM2 serial port. You need to select the same port in the Avid
editing application.
Video Deck Control Cabling
To video deck
RS-422 connection
RS-232 connection
To Avid editing
system
Serial Adapter