Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 226 / 282

8 Maintaining Your AirSpeed Multi Stream
226
For information on reimaging your system, see “Checklist for Reimaging Your System” on
page 226 .
Checklist for Reimaging Your System
The following table provides a checklist of tasks that must be performed when reimaging
your AirSpeed Multi Stream system. Some of the tasks are contained in this chapter, while
others are contained in other chapters of this guide.
n
Follow this checklist and the procedures closely to ensure a successful reimage.
‰
Load the Windows XPE Restore image, as described in the topic “Loading the Windows
XPE Restore Image” on page 227 of this guide.
‰
Set up your AirSpeed Multi Stream system, as described in the topic “Setting Up Your
System” on page 71 .
Setting up your system involves the following:
• Changing the computer name
• Adjusting the date, time and time zone
• Re-configuring your media drives for RAID 0 striping within Windows (This procedure
is different than the procedure for clean systems that have never been configured for
RAID 0 striping within Windows)
• Verifying your network connection
• (Optional) Creating a Windows User account
• Configuring your shared storage
• Setting up remote access to the AirSpeed Multi Stream server
‰
Install the Interplay Framework Workstation as described in the topic “Installing the Avid
Framework Workstation” on page 229 .
This must be done before installing the AirSpeed Multi Stream application.
‰
Install the AirSpeed Multi Stream application as described in the topic “Installing AirSpeed
Multi Stream Application Software” on page 230 .
IMPORTANT: When you are done installing the AirSpeed Multi Stream application, a
dialog box opens, asking if you want to reboot your system. Do the following:
• Make sure all other applications are closed, and then click Yes.
If outdated, or not in sync, the BIC and HUB will automatically be updated when the
AirSpeed Multi Stream application is launched. For information on launching AirSpeed
Multi Stream, see the topic “Starting AirSpeed Multi Stream” on page 71.