AVIATION DESIGN
- ZI le Chenet - 91490 MILLY LA FORET – FRANCE - Tel : int+ 33 1 64 98 93 93 - [email protected] – www.adjets.com
21
Assembling front and rear fuselage:
We strongly recommend not gluing the front and rear fuselage parts for easier handling and transportation
Insert M4 blind nuts in the rear fuselage.
Assemble the two fuselage parts together and screw the rear to the front with M4x20 Allen screws and
large washers. You will have easy access to the screws from the main gear doors
Winglets:
Fit the winglets on the wing tip.
You can glue them with silicone glue, screw them
or simply hold them with tape
Strobe lights can be installed in the winglets.
Clear formed covers are supplied with the kit.
Simply cut the winglet on the engraved location.
Insert strobe light and wiring and glue the clear
cover with ZAP canopy glue.
Hold them with tape and let dry overnight
Canopy:
All fiberglass canopy windows can be cut with diamond disk.
Just keep a 1 or 2 mm border to glue the clear canopy easily
Put some Zap canopy glue on the border of the
fuselage
Put each canopy and hold them with tape outside
Let it dry overnight. Same applies to all other windows.
