AVGear AVG-UHD4K-44 V2, Руководство пользователя

Страница: 13 / 33

AVG-UHD4K-44 V2
0111 4K@30HZ 7.1CH
1000 4K@60HZ 4:2:0 Pass though CH
1001 4K@60HZ 4:2:0 7.1CH
1010 4K@60HZ 4:4:4 Pass though CH
1011 4K@60HZ 4:4:4 7.1CH
1111
Enable Software EDID management mode:
RS232 control or Web-based GUI control
5.4 IR Control
The AVG-UHD4K-44 V2 features a built-in IR receiver to receive IR signals from an
IR remote for IR control. If the external IR receiver or other IR control device needs
to be used, the IR IN port on rear panel can be connected.
Here is a brief introduction to the IR remote:

Standby button, press it to enter/exit standby mode.

INPUTS :
Input channel selection buttons.

OUTPUTS:
Output channel selection buttons.
Menu buttons

ALL : Select all inputs/outputs.
To switch an input to all outputs:
Example: Input 1 to all Outputs:
→ Press INPUTS 1 + ALL + ENTER

EDID management button:
One input port learns the EDID data from one output
port.
Example : Input 2 learns EDID data from output 4:
→ Press EDID + INPUTS 2 + OUTPUTS 4 + ENTER
All input ports learn the EDID data from an output port.
Example : All input ports learn EDID data from output 3:
→ Press EDID + ALL + OUTPUTS 3 + ENTER

CLEAR: Cancel operation.

ENTER: Confirm operation.