AVG-K12-VGA
Select the desired update file and press Apply, it will then start upgrading.
5.7. Configuration Data
The AVG-
K12’s IR or RS232 configuration data can be copied to a USB thumb drive
and loaded into additional systems or be saved as a backup.
To Copy Configuration Data
1) Insert a 4GB or smaller FAT32 formatted thumb drive into the CONFIG port on
Control Panel.
2)
Press “
HDMI 2 / VGA
” + “
OFF
” at the same time for three seconds on the
Control Panel. As soon as the buttons are released, they will light up while the
copying the data is in progress.
3) Remove the thumb drive from the CONF
IG port once the buttons go aren’t lit
up.
To Load configuration data
1) Insert a 4GB or smaller FAT32 formatted thumb drive with saved configuration
data into the CONFIG port on Control Panel.
2)
Press “
HDMI 1
” + “
ON
” at the same time for three seconds on the Control
Panel, the blue backlight of buttons will go out when the import is successful.
3) Remove the thumb drive from the CONFIG port once the buttons go
aren’t lit.
Enter the Command Menu via Web GUI, the loaded RS232 commands will be
displayed
, and then press “
Save
’’ to confirm.
