AVGear AVG-CSK-HD44, Руководство пользователя

Страница: 42 / 44

AVG-CSK-HD44 KIT
10. Troubleshooting and Maintenance
Problems Potential Causes Solutions
Color losing or no
video signal output
The connecting cables may
not be connected correctly or
it may be broken. Check whether the cables are
connected correctly and in
working condition.
Fail or loose connection.
Make sure the connection is
good
No output image
when switching
No signal at the input /
output end.
Check with oscilloscope or
multimeter if there is any
signal at the input/ output end.
Fail or loose connection.
Make sure the connection is
good.
The display doesn’t support
the input resolution.
Switch for another input
source or enable the display to
learn the EDID data of the
input.
Cannot control the
device via front panel
buttons
Front panel buttons are
locked.
Send command /%Unlock; or
select unlock in GUI interface
to unlock.
Cannot control the
device via IR remote
The battery has run off. Change for new battery.
The IR remote is broken.
Send it to authorized dealer for
repairing.
Beyond the effective range
of the IR signal or not
pointing at the IR receiver. Adjust the distance and angle
and point right at the IR
receiver.
The IR receiver connected to
IR EYE port is not with
carrier.
Change for an IR receiver with
carrier.
Power Indicator
remains off when
powered on
Fail or loose power
connection. Check whether the cables are
connected correctly.
There is a blank
screen on the display
when switching The display does not support
the resolution of the video
source.
Switch again.
Manage the EDID data
manually to make the
resolution of the video source
automatically compliant with
the output resolution.