AVG-TMX88PRO
The IR signal is sent by corresponding IR remote, then it is transferred to the
HDBaseT receiver, then to the corresponding zone of the matrix through the cat
cable, finally it is transferred to the IR OUT port and received by the controlled
device.
Switching Operation
: (8 IR IN ports correspond with 8 HDMI input ports separately
in default mode.)
Sending command (see RS232 Control section 5.3)
: [x1]R[x2].
x1: Corresponding to the 8 IR OUT ports of the matrix, the IR transmitter
connected to this port can be placed at IR receiving area of output device or
the AVG-TMX88PRO itself.
x2: Corresponding to the zone (receive IR signal from HDBaseT receiver with IR
IN port connects with IR receiver) number of AVG-TMX88PRO.
Example: Send command
“3R2.” to transfer IR signal received from zone 2 to IR
OUT port 3.
