Avery Weigh-Tronix ZT350, Инструкция пользователя

Страница: 12 / 32

12 ZT350 Dimensioner User Instructions
Operation
3.1.3 +Weigh
Use this task to capture the weight from an SMA protocol connected scale. This
information plus the scanned barcode and saved dimensions are stored on the device.
You must have your ZT350 paired to the scale prior to this task. See BT Pair on
page 13 for information on pairing.
1. When you access the +Weigh task you will see this screen:
2. Press or to trigger the reader and scan the barcode. This identifies
the record.
The screen below is displayed. It shows the weight transmitted from the
indicator.
3. Press to accept and store the weight.
4. Extend tape, to capture the dimension, press to capture for L.
5. Perform the operation for the W and H.
6. When complete the measurements are on the screen, to clear press next .
m
If there is no Bluetooth connection between the ZT350 and the weight indicator the
following error screen is displayed:
m