ZT350 Dimensioner User Instructions
13
3.2 ZT350 Bluetooth pairing
7.
Any time the measurement was incorrectly taken you can press
and
retake the measurement.
3.1.4 Upload
Use this task to send the captured records on the device to the ZT350 application. See
.
3.1.5 BT Pair
Use this task to pair the ZT350 with a scale display. You must scan a created ‘pair’
barcode to make the pairing. See
ZT350 Bluetooth pairing on page 13
for details.
3.2 ZT350 Bluetooth pairing
The ZT350 has the ability to pair with a weight indicator or PC. The Bluetooth pairing
is 1 to 1. It can only be connected to one device at a time.
3.2.1 Pairing with a weight indicator
1.
Ensure the weight indicator has SMA enabled and a Bluetooth module installed.
2.
Obtain the MAC Address of the Bluetooth module.
3.
You need to create and print a barcode to allow the ZT350 to pair with the
Bluetooth Module.
4.
Create a barcode in Code 128 starting with
<Fnc 1>
(This is case sensitive.)
Followed by the MAC Address of the Bluetooth module. There should be no
space after
<Fnc 1>
.
Example barcode:
<Fnc 1>00066649CAAE
Free barcode generator can be found at http://www.barcode-
generator.org/
5.
Once the barcode has been generated and printed, power on the ZT350.
6.
Press
&
to access the
Tasks
Menu.
Содержание ZT350
