20
ZM505 Indicator User Instructions
Operator Instructions
ID key (F3)
1.
Press the
ID
or the
F3
key to enter an ID number …
id
appears briefly on the screen and then a flashing
0
.
2.
Use the keypad to enter up to seven digits for the ID. When you have entered
the ID, press the
ENTER
key and the main screen appears.
SETPT key (F5)
1.
Press the
SETPT
(
F5
)key …
out1
is briefly displayed followed by the current weight value for setpoint
1.
2.
Press
ENTER
to accept the displayed value or key in a new value and press
ENTER
to accept.
out2
is displayed followed by the current weight value for setpoint 2.
3.
Press
ENTER
to accept the displayed value or key in a new value and press
ENTER
to accept.
out3
is displayed followed by the current weight value for setpoint 3.
4.
Press
ENTER
to accept the displayed value or key in a new value and press
ENTER
to accept.
The indicator returns to the normal weighing mode
3.2.4 Performing Accumulation weighments
The accumulator application can be used to record totals of individual weighments.
Follow these steps:
1.
Press
ZERO
to zero the scale, if necessary …
0
is displayed.
2.
Place empty container on the scale and press
TARE
…
Net weight is displayed.
3.
Place item on the scale. Press
to add this weight to the accumulator
and to print the configured print format …
The
annunciator lights briefly and
Acc
is briefly displayed.
4.
Remove weight from the scale. Weight must return to inside the gross zero
band before another print and accumulation can be recorded.
5.
Repeat steps
and
for each weight you want to accumulate.
If enabled, press and hold the
key to transmit current active total
channel data out serial port #1. This will also clear the current active
channel data if the clear feature is enabled under the Supervisor’s
Menu.
Содержание ZM505
Страница 1: ...ZM505 Indicator User Instructions AWT35 501338 Issue AC...
Страница 34: ...34 ZM505 Indicator User Instructions Supervisor menu...
Страница 35: ......
