Avery Weigh-Tronix WP-233 Series, Руководство пользователя, Страница: 36 / 40

36
The printer powers up in the column mode last
selected by configuration. You can change the
column width by sending the appropriate control code
from the list below:
Control code 29 - 24 columns
Control code 30 - 32 columns
Control code 31 - 40 columns
You can send the control code at any point on a line
before the buffer becomes filled. You cannot change
column widths on the same line.
The RS-232 serial version can produce all ASCII
characters from hex 20 through hex 7D (decimal 32
through 125). Here’s what they look like:
Note the last two codes of the usual ASCII character
set are not supported. Instead, if CHR$(126), which
corresponds to hexadecimal 7E, is received by the
printer, it will print the character defined in its RAM
(Random Access Memory). The section on USER
Programmable Character describes how this RAM
can be loaded with any 6 x 8 pattern.
Command Print formatted data
<ESC> 0 HH:MM 24 hour format
<ESC> 1 HH:MM_?M 12 hour format with
AM
or
PM
<ESC> 2 MM/DD/YY month/day/year
<ESC> 3 DD-MM-YY day-month-year/numeric
month
<ESC> 4 DD-MON-YY day-month-year with 3 letter
abbreviation of the month
<ESC> 5 DOW day of week abbreviation
<ESC> 6 currently configured format
<ESC> 9 XXXX current sequence number
Selectable Column
Width
Codes 29, 30, 31
Printable Characters
NOTE: (ASCII
characters from Hex
80 to FF are
unsupported and
will cause problems
if you attempt to
print them.)
Printer Escape
Command Code
Definitions