Avery Weigh-Tronix WP-233 Series, Руководство пользователя

Страница: 10 / 40

10
12. Put the paper spindle into the paper roll as shown
below, and place the roll with the spindle onto the
snaps near the back of the printer. Turn the paper
roll so as to take up any slack in the paper
feeding to the printer. Make sure the roll of paper
turns freely. If it does not turn freely, the paper will
jam and will possibly damage the printer mecha-
nism.
1. Advance the paper about one inch beyond the
paper cutter by using the Paper Feed switch.
2. Lift the paper roll away from the printer housing
and cut the paper feeding to the printer with
scissors. Try to make the cut as square as
possible to help the next time you reload the
paper.
3. Pull the remaining paper through the printer
mechanism. Be sure to pull the paper from the
top (paper cutter side).
WARNING! Pulling the paper out of the back of the
printer will damage the print mechanism.
To Remove the
Paper Roll