14
QC-3265 Checkweigher User’s Manual
Low voltage on the LED version.
Displayed while a key is pressed when attempting to
modify a sealed selection without edit privileges.
Scale unstable at power up.
Serial port handshake not responding.
Plastic Knob Installation for USDA Approved Applications
Figure 4
Plastic knob installation
Below are the instructions and illustration for installing the plastic knobs
which are necessary for USDA approved installations.
Install knobs by
• Removing the two 10-32 hexhead screws accompanying the unit.
• Replace with knobs.
• Use supplied Belleville washers between knob and mounting surface.
• Install the washer with the major diameter bearing against mounting
surface.
