11
QC-3265 Checkweigher User’s Manual
User Menu
Without realizing it you have learned how to access the User menu. When
you press the
>
key from either the checkweighing (deviation display) or the
weighing (weight display) mode you access the User menu shown below.
You have already learned about
UNDER
and
OVER
tolerance. The other
items in this menu are described below.
OFF
This item appears only if battery power mode is enabled in setup,
With
OFF
displayed, press the
v
key to turn off the QC-3265.
Pressing any key turns the unit on in weight display mode. Battery
power is not an option with QC-3265s equipped with an LED
weight display.
ABOUT
Press the
v
key with
ABOUT
displayed and
QC3265
will be
displayed. Press the
>
key to step through the EPROM part
number, dash number, revision letter, and then back to
QC3265
.
Press the
^
key to go back to the
ABOUT
display.
TEST
Press the
v
key with
TEST
displayed to access the test menu
shown in Figure 3. Use the
v
,
^
,
<
,
and
>
keys as before to move
through the menu.
AUDIT
Lets you see the CA (calibration) audit number and the
CF (configuration) audit number.
DISP.
Press the
v
key twice to perform a display segment
test. Press the
<
or
>
key to change the direction of the
test. Press the
^
key twice to stop the test and return
to
DISP.
Figure 2
User Menu
Move to the right by pressing the
>
key
Move down by pressing the
v
key
Move left by pressing the
<
key
Move up by pressing the
^
key.
