Avery Dennison ALS 306, Руководство по установке

Страница: 23 / 56

23
2 I
NSTALLATION
2.2 U
NPACKING
,
ASSEMBLING AND CONNECTING THE MACHINE
ALS
306
309
2.2.3
Mounting the unwinder
Tool:
– 8 mm hex socket driver
Prerequisites:
–
RH unwinder : The mounting positions top right and
side right require a RH unwinder, see rating plate
[30arrow].
– LH unwinder : The mounting positions top left and
side left require a LH unwinder, see rating plate
[30arrow].
Also refer to chap. “About the unwinder” on page 186.
Installing the unwinder holder

Determine the operation position of the ALS 30x.
– Admissible operation positions for top labelling see
“Top labelling” on page 14, for side labelling see “Si-
de labelling” on page 16.

Mount the unwinder holder to the ALS 30x basic
module, according to the determined operation
position.

Tighten the 4 screws [29A].
– Use the screws delivered with the device [29B].
Tightening torque:
– 4 screws [29B] on the unwinder holder foot
(DIN EN ISO 4762 M10x25 A2). . . . . 45 Nm
[29] Mounting screws at the unwinder foot.
[30] Rating plate (arrow) at the unwinder.
A