Avery Berkel TB Series, Инструкция пользователя

Страница: 5 / 24

1 Installation
3
User Instructions for TB/TC Series Balances
1 Installation
1. Place the balance in its chosen position, which should be
free from vibration and draughts for optimum performance.
2. Remove any packing material.
3. Place the pan on the pan support.
4. The balance is factory set to either 110–120V or 220–240V
50/60 Hz AC supply. Ensure that the voltage on the
rating plate on the rear of the balance corresponds with
the supplied voltage. If not refer to section 1.1.
5. Connect the mains lead to the balance and an AC supply.
6. Turn on the mains switch which is located at the rear of the
balance.
The readout displays a row of dashes for a short period,
then all eights, and then zero. The balance is now ready for
weighing since little or no warm up time is required.
1.1 Changing the voltage setting
1. Remove the mains lead from the balance.
2. Prise out the voltage selector/fuse holder.
3. Replace the fuse with one of the correct rating.
New Supply Fuse RatIng
110V – 120V 20mm, 500mA, anti–surge
220V – 240V 20mm, 250mA, anti–surge
4. Replace the voltage selector/fuse holder in the correct
orientation.