Model 6700 Family User’s Manual
9
1.
With the scale powered on, make sure the
scale platter is empty and the display is at
zero. If it is not, press the
ZERO
key…
0.00
is displayed.
2.
Place an item to be weighed on the scale
platter…
The scale will display the gross weight.
3.
Remove the item from the scale platter.
ZERO Key
– The
ZERO
key will zero the scale if
weight is stable, and acts as the NO or SCROLL
key in the Menu mode.
TEST Key
– The
TEST
key can be used to
perform the initial power-up test sequence,
recall diagnostic routines, or to view the scale
configuration information. This key also acts as
YES or ACCEPT in the Menu mode.
The 6700 models power up ready for weighing
operations. Access the Menu mode by setting
Switch 1 shown in Figure 1 or 2 to the OPEN or
Menu mode position.
Top View of 6720 Scale with Platter Removed.
Performing a Normal
Weighment
If the scale is outside
the ± 2% zero window,
center dashes are
displayed “- - - -.” If
necessary, reapply
power to reset the
initial zero setting.
Operation Controls
Accessing the
Menu Mode
Figure 1
6720 Switch
Location
