avertX HD810, Руководство пользователя

Страница: 34 / 47

34
System
Host Name – The Host Name is used to identify the camera on your
system. If camera based Motion Detection is enabled and is set to send
alarm message by Mail/FTP, the host name entered here will display in
the alarm message.
Time Zone – Select your time zone.
Time Format – Select your desired time format.
Sync With Computer Time – Select to synchronize the camera date
and time with the connected recorder.
Sync with NTP Server – Manual allows you to define the date and time
manually. Network Time Protocol (NTP) is an alternate way to
synchronize your camera’s clock with a NTP server. Specify the server
you wish to synchronize in the NTP Server box. Then select an Update
Interval. For more information about NTP, visit www.ntp.org.
Security
User
The Administrator account has the authority to configure the IP camera
and authorize users’ access to the camera. The User accounts have
access to the camera with limited authority.
Admin Password
To change the administrator password:
1. Type a new Administrator Password, and then type again to
confirm the password.
2. Click Save.
Add User
The user name and passwords are limited to 16 characters with no spaces
permitted. There is a maximum of twenty user accounts.
1. Type the new Username and Password .
2. Select I/O Access, Camera Control, Talk, and/or Listen as
permissions for the User.
I/O Access – All functions in the Setup and Advanced menus are
available to the User.
Camera Control – Allows the User to change camera controls in
the Setup menu.
3. Click Add .
Delete User
1. Select the user name on the User Name list.
2. Click Delete to remove the user.
3. Click OK in the confirmation window.
Note: There is a momentary wait time while the Network Camera
Manager saves parameters. When this period is complete, the
User will be deleted.
Modify User
1. Select the user name on the User Name list .
2. Click Edit.
3. In the resulting window, modify the Password and/or feature
permissions.
4. Click Save .
Note: For security reasons, every time the user properties are
opened the access check boxes are automatically cleared.
Make sure you select any user access options each time you
edit the user properties.
HTTPS
HTTPS allows secure connections between the IP Camera and web
browser that protects camera settings or Username/Password info from
snooping.
To use HTTPS, you are required to install a self-signed certificate or a
Authority (CA) -signed certificate. The HTTPS certificate can be
obtained by either creating and sending a certificate request to a CA or
creating a self-signed HTTPS certificate