avertX HD810, Руководство пользователя

Страница: 31 / 47

32335AA 31
When motion detection is activated,
the Motion pop-up window will open. When motion is detected, the signals
will be displayed on the Motion
window as shown below.
Motion Detection
Turn motion detection on or off. The default setting is Off.
Motion Detection Setting
•
Sampling pixel interval [1-10] – Default value is 10, which means
system will take one sampling pixel for every 10 pixels.
•
Detection level [1-100] – Default detection level is 10. This item
sets the detection level for each sampling pixel; the smaller the
value, the more sensitive it is.
•
Sensitivity level [1-100] – The default sensitivity level is 80, which
means if 20% or more sampling pixels are detected as changing,
the system will detect motion. The bigger the value, the more
sensitive it is. As the sensitivity value is increased, the red
horizontal line in the motion indication window will be lowered
accordingly.
•
Time interval (sec) [0-7200] – The default interval is 10. The value
is the interval between each detected motion event.
Software Upgrade
Use the Software Upgrade page to view the current version of camera
firmware, and upgrade the firmware if necessary.