29
without saving, and click
Default
to revert back to original factory setting.
(8)
(9)
(10)
(7)
(1)
(2)
(3)
(4)
(5)
(6)
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras,
enable the
ALL
check box. To select more than one camera,
Right click
on the camera
icon. To select one camera only,
Left click
on the camera icon. The camera icon turns red
when it is selected.
(2) Recording Mode
The blocks from 00 to 23 represent the time in 24-hour clock. To record in full 24 hours,
select the recording mode and click the
~
button. If you want to only record at a particular
time, click the colored block beside the recording mode then click on the time blocks. When
the system starts recording a red triangle mark would appear at the upper left corner of the
screen. The recording modes are listed below:
-
Always Recording
Record the video from the selected camera and save it to the designated storage path
(see also
).
-
Motion Recording
Start recording the video from the selected camera only when the system detects
movement. Once a motion is detected, the system automatically saves the previous
frames and stop based on the
Start Record Prior
and Stop
Record After settings
.
-
Smart Recording
Automatically switch to recorded at the maximum frame rate setting once a motion is
detected and if there is no motion, it records at the minimum frame rate setting Set the
maximum and minimum frame rate setting in
section.
-
No Recording
The system won’t do any recording.
(3) Motion Detection
Adjust the sensitivity of the motion detector. The higher the value, the finer the sensitivity is
detected. When it detects a motion, a green triangle mark would appear at the upper left
corner of the screen.
(4) Quality
Adjust the video quality. The higher the value, the lower the compression level and uses
more hard disk space.
i
Only available when user selected “
Transcode by MPEG4 Encoder
” in
Video
Setting
at
Camera setting
)
Содержание XR8032
Страница 1: ...AVerMedia XR8032 User s Manual...
