4
For the First Time Using the DVR Unit
STEP 1: To Connect with the IP Camera
1. Please make sure the DVR unit and IP camera are in communication area.
2. Press and hold the
WPS
button of the DVR unit. To release button until hear the beep sound. The
Wireless indicator
that is located at front panel of the DVR unit will light up.
3. Press and hold the
WPS
button of IP camera until the
power LED
turns off (about 5 seconds), and
then, the LED will start to blink at every 2 seconds. And then, wait about 120 seconds for IP
camera to communicate with the DVR unit.
4. If the DVR unit and IP camera has successful to communicate. The Wireless status indicator that
is located at front panel of the DVR unit will start flashing.
5. And, the surveillance monitor should see the live video from IP camera.
Preview UI
WPS button
Wireless Indicator
WPS button
Power LED
Wireless Status Indicator
P/N:
300ACF2XMWxxx
July 2009
