Avermedia AverComm H100, Руководство пользователя

Страница: 65 / 68

61
ENGLISH
2. The video on the screen is blurry.
Press Zoom - or Zoom + button to adjust the focus of the AVerComm
H300/H100 camera.
3. I'm trying to share the contents from VGA port but when I pressed " Present"
on the remote control, there is no VGA signal indicated on the selection

Make sure the device such as document camera or computer is properly connected to
the VGA IN port of AVerComm H300/H100 HUB.

For notebook, make sure it output the display on external monitor.
4. The
“Present Failed” error message appeared on my screen when I started the
Present to share content.
The far site you are calling does not support H.239 features or it is disabled. Please contact
the system administrator for the detail setting.
N
N
e
e
t
t
w
w
o
o
r
r
k
k
1. After resetting the system to default setting, the system IP address is still
undetectetable or invaild value.

If the IP/Subnet Mask/Default Gateway shown incorrect value, you can modify the value
in “Static IP” Mode.

The default Obtain IP address selection in AVerComm H300/H100 is in
“Static IP”
.
Please change the selection into DHCP in LAN Configuration, The system will
automatically detect the IP from DHCP server.
2. Why cant I access Web tool?

Check if you have entered the correct IP address and AVerComm H300/H100 is powered
on.

Ensure HTTP Port 80 is opened in your firewall setting.
3. The call is connected but there
’s no video/Audio from far site

Please verify your firewall policy setting or verify NAT Configuration/NAT public address.
4. I got the error message showing
“ DHCP service failed “ when I try to obtain IP
address as DHCP.

Try to verify your DHCP server connection.

Verify if the security setting for MAC in your network device.
5. Why I cant obtain DNS on AVerComm H300/H100

AVerComm H300/H100 does not support DNS.