Quick Installation Guide
ENG-3
2.2 Status of the LED indicators
When the unit is powered on, all three LED indicators light on and off first, and then the blue
LED indicator lights up again and starts to blink.
AVerCaster Combo
is ready after a few
seconds when the blue indicator goes from blinking to steady.
Please refer to the following table to check the status of LED indicators.
LED
Indicators of
Status Description
Blue
Power & Network
Off - power is off
Blinking - disconnected to network
On – connected to network
Green 1
Analog tuner
-Analog TV
-Composite
-S-Video
Off - tuner is not in use
Blinking - tuner is scanning
On- Content streaming has been set up
Green 2
Digital tuner
-DVB-T
Off - tuner is not in use
Blinking - tuner is scanning
On- content streaming has been set up
