Avermedia 530, Руководство пользователя

Страница: 22 / 64

English – 16
Step 3 (1)
Reminder
Make sure a NTFS-formatted hard drive is
connected or installed to the device. (For details,
see Chapter 4.3)
Check the connection of network.
Press OK to start setup.
A router which supports DHCP IP network is
recommended. Also, refer to Ch. 6.3 for manual
connection setup.
Step 3 (2)
Network Connection Failure
If you have not connected to a valid network, a
short result of failed network connection will be
shown.
Press OK to continue.
Press to go back to the previous page.
Step 4
No Hard Drive Detected
If you have not yet installed any storage device,
install it before continuing the setup process.
Then press to go to the previous screen and
press OK to run disk checking process.