AVer SD1306 Скачать руководство пользователя страница 65

Страница: 65 / 76

Event > Arrangement > Preference



Record File:



File Format:

IP camera allows 3 different types of recording file to change its record size.

When motion/alarm is triggered, there are 3 different types of record mode.



AVI File (With Record File Setting )



JPEG Files (With Record File Setting), only with MJPEG compression format.



Single JPEG (Single File with Interval Setting) (JPEG photo).



Pre Alarm and Post Alarm:

Setups for video start and end time when motion detected, I/O, or

other devices got triggered.

[Note]

Pre/Post Alarm record time is based on record time setting and IP camera built-in RAM

memory. When information is too much or video quality set too high, it will cause recording frame

drop or decrease on post alarm recording time.



Network Connected:

When the network is down, it will save the video to local micro SD/SDHC

card.

[Note]

This function is only enabled in wire connection.



Network IP check:

When the connection is down, it records the

video

to micro SD/SDHC card.

Make sure the video recording is continuous. To use this function, key in the IP address of the PC

which has recording software installed. E

nable the function of “

Save to SD card

”, then click

“

Apply

”.

Содержание SD1306













































































Результаты поиска

Содержание SD1306

Отзывы:

Похожие инструкции для SD1306

Бренды по названию

Популярные бренды

AVer SD1306, Руководство пользователя

Результаты поиска

Содержание SD1306

Отзывы:

Похожие инструкции для SD1306

Бренды по названию

Популярные бренды