46
Zone Mode
Set up the block areas for the camera to detect the presenter and track the presenter when the
presenter appears within the pre-configured areas (preset areas).
1. To configure the preset areas:
a.
Select the number of blocks
(
2 Blocks
,
3 Blocks
or
4 Blocks
) you want to configure for the
preset areas. Up to 4 preset areas can be configured.
b.
Select a preset number from the drop-down list (
Preset 6 ~ 9
).
c.
Use
,
,
,
,
and
to move the camera to the desired position.
d.
Click
Save
to save the position to the selected preset number. A preset thumbnail will be
displayed below the preview window.
e.
Repeat the steps to set up more preset areas.
[Note]
To ensure smooth transition while tracking the presenter, please overlap the set up preset
areas. Do not separate the preset areas.
6
7
8
Ensure to overlap the preset areas
6
7
8
Do not separate the preset areas
Содержание PTC310HWV2
