
47
Select
“Run”
located next to
“Save System
Log”
to save the system log into your USB Flash
drive.
After the file is saved, select
“OK”
. Remove the
USB Flash drive and insert it into your
computer’s USB port. Located the file
message.tar.gz and send it to the technical
support team.
Firmware Update Notice
Select this function check box to enable firmware
updated notice function. By default, this function
is enabled.
Far End Camera Control
Sel
ect the “
Far Control of Near Camera
” check
box to enable the far site to control your camera.
By default, this function is enabled.